AliDeck Decking Board Testing Slip Resistance Data and Results

AliDeck is committed to manufacturing products that are in compliance with and exceed all relevant safety legislation. This is part of our ongoing drive to deliver excellent aluminium decking products to the market and to ensure absolute peace of mind for all of our clients and trade partners.

Accordingly, AliDeck have performed Slip Resistance testing on our whole range of aluminium decking boards. Utilising a calibrated certificated portable Pendulum instrument, testing was conducted in accordance with BS7976 part 2 in both wet and dry conditions. With a total of eight measurements being made in three different directions, all AliDeck decking boards were found to pose a “Low Risk” for slips in all conditions.

How the result is calculated

Discounting the first three Pendulum swings, a mean figure was calculated from the final 5 swings in each direction and wet and dry conditions to give a final score out of 100, with 100 being the highest possible score*. Slip Risk ratings were then awarded according to the adjacent table.

PTV Slip Potential
<25 High
25-35 Moderate
>35 Low

A score of less than 25 represents a High Slip Risk, 25-35 represents a Moderate Slip Risk, and a score greater than 35 represents a Low Slip Risk. All AliDeck decking boards scored greater than 35 in all conditions, earning Low Slip Risk rating.

Detailed Slip Resistance test result data for each board is found in the following tables:

Senior & Junior Balcony Board (Standard Sand & Grey)

DIR’ N CONT’ N 1 2 3 4 5 MEAN PREV RISK
A DRY 100 100 100 100 100 100 100 100 100 0 Low
A WET 85 86 85 85 84 84 83 84 84 0 Low
B DRY 76 79 78 78 77 77 76 77 77 0 Low
B WET 48 47 46 46 45 44 44 45 45 0 Low
C DRY 99 99 98 97 97 96 95 96 96 0 Low
C WET 59 58 57 56 55 54 54 54 54 0 Low

Senior & Junior Balcony FLAT Board (Standard Sand & Grey)

DIR’ N CONT’ N 1 2 3 4 5 MEAN PREV RISK
A DRY 70 68 67 67 67 67 67 66 67 0 Low
A WET 44 41 39 39 39 38 38 38 38 0 Low
B DRY 65 64 64 64 64 64 63 62 63 0 Low
B WET 44 44 39 39 38 38 38 38 38 0 Low
C DRY 66 65 64 64 64 63 62 62 63 0 Low
C WET 50 47 45 45 45 44 44 44 44 0 Low

Standard Interlocking Board (Standard Sand & Grey)

DIR’ N CONT’ N 1 2 3 4 5 MEAN PREV RISK
A DRY 100 100 100 100 100 100 100 100 100 0 Low
A WET 85 86 85 85 84 84 83 82 84 0 Low
B DRY 76 79 78 78 77 77 76 77 77 0 Low
B WET 48 47 46 46 45 44 44 44 45 0 Low
C DRY 99 99 98 97 97 96 95 97 96 0 Low
C WET 59 58 57 56 55 54 54 53 54 0 Low

Further information on the performed Slip Resistance testing results is available in Slip Resistance Data Sheets from the testing organisation, Advance Group, on our technical downloads page: https://www.alideck.co.uk/downloads/

*Please note that the testing software will only record a maximum score of 100, when the pendulum is stopped (due to maximum friction) 100 is the given score that can be achieved with the measuring instrument used.

Macro and Micro Roughness Value Test (Rz) In accordance with BS7976

Surface Microroughness is a component of surface texture, it is generally determined by looking at deviations from the normal (mean line) profile of the surface. If these deviations are large the surface is rough, if they are small the surface is smooth. Using a tool with a stylus to measure these variations, a Rz value is able to be calculated. The Rz parameter is the mean value of the maximum peak to valley height of the profile within the sampling lengths.

This test has been performed to assess the Macro and Micro Roughness (Rz value) of the surface of the coating used on the AliDeck Aluminium Decking Range in order to ascertain Slip Potential against the following values:

Slip Potential Rz Microroughness
High Less than 10 µm
Moderate 10 – 20 µm
Low Greater than 20 µm

Test Result 1: 37 micrometres (Low Slip Potential)

AliDeck Rz Slip tests

Test Result 2: 38 micrometres (Low Slip Potential)

AliDeck Rz Slip tests